Steps for Fixing a Blister on Roofing Prince William County
One of the problems that people have with the roofing Montgomery County is blistering on their roofing. But the good news is this is something on roofing Prince William County that a homeowner can fix on their own. Here are the steps for fixing a blister.
- Slice the blister carefully down the middle using a utility knife. The cut ought to penetrate the blister’s full depth but shouldn’t reach the felt beneath it.
- Lift the edges of the blister. If there’s water inside, press in from the edges towards the center to squeeze the water out of the roofing layers. Soak up the water using rags and then prop your edges up so they can dry. When it’s cold outside or if it’s fully saturated, use a propane torch with a flame-spreading nozzle for drying the felt.(use safety goggles while doing this). Carefully move your flame over the blister’s inner layers. The tar and felt are really flammable, so make sure that the layers aren’t hot enough to bubble or burn..
- Spread a thick coating of some roof cement upon the loose felt’s edges and very firmly press the blister’s sides down.
- Permanently close the blister using 6d galvanized nails on the slit’s sides, and then use roof cement over the whole blister, ensuring the heads are covered well.
If you need help with roofing Fauquier County, go to www.marshallroofing.com. Marshall Roofing is ready to help you with all of your roofing needs and questions that you have.
